Ruvati RVH8300 User Manual download pdf (Page 3)

RVH8300

RUVATI USA

www.ruvati.com

Installation

1. Place template on countertop. Position

it such that the sink will have proper

clearance from cabinet.

2. Trace a line around the template.

Determine what “reveal” you want

your sink to have (see previous page)

and based on that, adjust the line

accordingly. Cut along the line.

3. Turn the countertop upside down,

and mark evenly-spaced positions

for the anchors for the mounting clip.

We recommend 3 mounting clips for

the sink sides 20” and longer, and 2

mounting clips for the shorter sides.

Drill holes for the anchors (following

the countertop manufacturer’s

instructions) as shown below. Use

a drill bit with stop block to avoid

drilling through the countertop.

Secure anchors into the countertop

and fasten mounting clips loosely.

NOTE: For granite, marble or solid stone

countertops we recommend using lead anchors

which are glued to the countertop.

4. Clean the underside of the countertop

and the rim of the sink. Using a good

quality silicone caulk, apply silicone

caulk evenly around the rim of the

sink.

5. Place sink over the countertop

opening. Tighten the screws until

mounting clips are snug against sink.

6. Check alignment of sink to countertop

opening and move slightly if you have

to.

7. Tighten down clips evenly without

overtightening. Remove excess

silicone.

NOTE: The following instructions are for wood countertops. For granite, marble or solid

stone countertops, ask your fabricator for installation instructions.

Rev 12/11

Printed in USA

Page 3

1 2 3 4

Comments to this Manuals

No comments

Ruvati RVH8300 User Manual Page 3

Comments to this Manuals

Related products and manuals for Kitchen Ruvati RVH8300