Ruvati RVH8300 User Manual download pdf (Page 2)

RVH8300

RUVATI USA

www.ruvati.com

Attention Installer

1. Read these instructions carefully before installation. Inspect sink for damages. Do not

install if the sink is damaged.

2. Ruvati recommends that installation of undermount sinks be done by a professional

installer.

3. Templates are only provided as a guide. Place template on sink to ensure the template

will give you the proper cutout for the sink. Ruvati is not responsible for improper sink

or countertop installation. Ruvati is not liable for any damages to sink or countertop or

personal injury during installation.

4. The instructions in this guide are for installation on a wood countertop. For installation

on granite, marble or cultured stone countertops ask your fabricator for proper

installation instructions. Remind your fabricator to install the sink in a way that it can be

removed in the future from the countertop if necessary.

5. Observe all local plumbing and building codes.

Alignment of sink to cutout is critical for a superior t and nished look. Depending on

your aesthetic preference, Ruvati sinks can be installed either with a 1/4” reveal, ush t, or

with a negative reveal. Decide on your prefence prior to installation.

1/4” Reveal

Flush Fit

The countertop edge sits approximately

1/4” back from the edge of the sink and

exposes the rim of the sink.

The countertop meets the edge of the

sink, tting ush with the sink bowl.

1/4” Overhang

The countertop extends 1/4” over the

edge of the sink on all sides.

Rev 12/11

Printed in USA

Page 2

1 2 3 4

No comments

Ruvati RVH8300 User Manual Page 2